Making a biogas plant
Introduction Due to high rate of population increase, large amount of fuel is required. So, a developed environment friendly system can assist to make fuel production better. In this project we are making a biogas
Electricity Saving Home.
Introduction This project aims for an advanced electricity saving system. By taking the help of modern engineering and technology we are designing a sensor based system which will avoid the wastage of electrical energy. This
Speed breaker water pumping system for overhead tank.
Introduction By using modern engineering and technology we are trying to get the underground water for drinking and irrigation purpose. By using speed breakers we are lifting water and storing it in a overhead tank
Automatic Food Serving Machine For Marriage Parties.
18 July, 2023
Anil
0 Comments
INSPIRE AWARD PROJECT
Research and Development
Science Project
3:55 pm
Introduction To reduce human effort, muscle power and to make the food serving process uniform as well as effective, we are making an automatic food serving machine for marriage parties. By using modern engineering, technology
Alcohol Sensing Alarm To Avoid Accident.
12 July, 2023
Anil
0 Comments
INSPIRE AWARD PROJECT
Research and Development
Science and Technology
Science Project
5:09 pm
Introduction By taking the help of modern engineering and technology, in this project we are trying to protect a passenger bus from accidents and undesirable situations. If the bus driver tries to drive the bus
ସୋଲାର ପାୱାର୍ଡ କ୍ଲିନ୍ଡ ରେଲୱେ ପ୍ଲାଟଫର୍ମ
ଉପକ୍ରମ:– ଏକ ବିକଶିତ ଓ ସ୍ୱଛ ରେଲୱେ ପ୍ଲାଟଫର୍ମ ନିର୍ମାଣ କରିବା ଉକ୍ତ ପ୍ରକଳ୍ପର ଲକ୍ଷ୍ୟ । ଆଧୁନିକ ବୈଷୟିକ ବିଜ୍ଞାନ ଏବଂ ପ୍ରଯୁକ୍ତି ବିଦ୍ୟାର ସାହାଯ୍ୟ ନେଇ ଏଠାରେ ଆମେ ଏକ ପରିଷ୍କାର ପରିଛନ୍ନ ରେଳ ପ୍ଲାଟଫର୍ମର ବ୍ୟବସ୍ଥା କରିଅଛୁ । ଏହା ସ୍ୱୟଂଚାଳିତ ହେବା ସଂଗେସଂଗେ
Sun Tracking Of Solar Panel
Circuit diagram of the project Arduino Code
Speed Control Of DC Motor.
Introduction This is a MOSFET based speed controller for DC motors. Motors with 12 Volt are suitable for this application. MOSFET is a voltage controlled device. So, when we vary the 10 kΩ potentiometer the
Temperature controlled fan
Introduction Here we are successfully controlling a BLDC blower by using arduino uno and DHT11. DHT11 is a temperature and humidity sensor. In our case when temperature exceeds 31 degree Celsius the blower is activated.
Measuring Temperature And Humidity.
Introduction Here we are trying to measure and display the value of temperature and humidity. By writing code for arduino and using temperature and humidity sensor(DHT11) we will be able to measure the parameters. We