ସର୍ଭୋ ମୋଟର୍ ରୋଟେସନ୍ କଣ୍ଟ୍ରୋଲ୍ ସର୍କିଟ ଡାଇଗ୍ରାମ୍

ମାଇକ୍ରୋକଣ୍ଟ୍ରୋଲର କୋଡ

//Su-Din Technology  "Servo rotation for rain gauge"
//CONTROL SIGNAL WIRE OF SERVO MUST BE ATTACHED TO A PWM PIN OF ARDUINO
#include<Servo.h>
Servo s1;
int i;
  void setup() {
  Serial.begin(9600);
  s1.attach(9);//Control wire of servo to PWM pin 9
  s1.write(i=180); /*when project is initially powered, 
           servo angle=180, 
          THIS IS A RESET OF PROJECT*/
}

void loop() {
 for(i=180; i>=0; i-=1){ 
 s1.write(i);        
 delay(480000);   // 8 minute time delay
         } 
 delay(1000);
}

Designer:
Er. Anil Kumar Prusty
Phone No. :- +91 9861004895